Compare lease costs · Australia
Konica Minolta vs Brother Printer Lease in Australia
The wrong size can leave an office locked in to a device that does not fit how much it really prints.
We lease Kyocera, HP, Toshiba and Brother. We do not lease Konica Minolta, so this page shows what a Brother lease gives you instead.
Rental or lease, it is the same 36 to 60 month agreement here, with no short term rental. Our multifunction devices double as a photocopier: they print, copy and scan.
On a Kyocera, HP, Toshiba or Brother lease from us, toner, parts, service and call outs sit inside one set monthly payment, so paper is the only thing you buy.
These two answer different questions, so sizing settles it before brand does.
Konica Minolta bizhub covers A3 colour and production finishing.
The Brother MFC-L range is a compact A4 workhorse for everyday office printing.
Skip to the verdict
Before you enquire
How long am I locked in for?
Terms run 36 to 60 months and nothing shorter is offered.
You pick the length at the start, and a 60 month term carries the lowest monthly figure.
What are my options when the term ends?
You decide between upgrading to a newer model, continuing on the same device, or returning it.
Nothing renews on its own, and any new agreement is quoted in writing first.
Can the equipment be swapped later?
The agreement allows a move to a bigger printer or a different model.
A swap is re priced and confirmed in writing, then delivered usually within about 10 business days of a confirmed order, installation included.
Does leasing suit a small office?
Small offices lease on the same terms as large ones.
Past roughly 500 pages a month, the comparison usually starts to favour leasing once cartridges and unplanned service calls are counted in.
Cartridges and unplanned service calls stop arriving separately and become one monthly set plan.
Can we get a quote while partway through an existing agreement?
Yes.
Many businesses who contact us are partway through an existing agreement.
We prepare your quote now and time the new installation to your current lease end date, so there is no overlap and no print outage.
Check the notice window in your existing contract early, because those dates are easy to miss.
Call us or submit the form and we will map the changeover with you.
Enquired on Monday and had a printer installed by Friday. Fast, easy, and exactly what we needed.
Get a Brother lease quote
Last updated: October 2026
Konica Minolta or Brother for a printer lease: which size fits your office?
Sizing settles this one: Konica Minolta bizhub suits workflows that need A3 or bound output, while Brother suits offices with no A3 workflow and a desk rather than a room for the printer.
Konica Minolta bizhub is an A3 colour multifunction range (25 to 65 pages per minute) built for in house production and booklet finishing.
The Brother MFC-L range is A4 (31 to 50 pages per minute), built around a compact desktop footprint and super high yield toner options.
LeasemyPrinter leases the Brother range from $160 a month (plus GST) on a 36 to 60 month term.
Maintenance, parts, service labour and genuine consumables are included, and you only buy paper.
Some businesses call it printer hire, some call it copier rental. It is the same 36 to 60 month agreement with toner, parts, service labour and call outs included, never day or week hire.
Ready to lease rather than compare? See our Brother printer lease option.
Talk to a Brother leasing specialist
We have leased printers to Australian businesses since 2010, with 153 Google reviews.
1300 873 460Konica Minolta vs Brother: side by side
Class of device
- Konica Minolta
- A3 colour MFP (bizhub range)
- Brother
- A4 mono and A4 colour MFP (MFC-L range)
Largest sheet size
- Konica Minolta
- A3
- Brother
- A4
Speed band
- Konica Minolta
- 25 to 65 ppm common configurations
- Brother
- 31 to 50 ppm across the MFC-L range
Device security
- Konica Minolta
- Self encrypting drive, secure print, IP filtering
- Brother
- Secure-print release and NFC card authentication on advanced models (e.g. MFC-L8900CDW)
Scan workflow
- Konica Minolta
- Scan-to-encrypted-folder, Workplace Hub
- Brother
- Scan to folder, email and the Brother iPrint&Scan app
Mobile / cloud print
- Konica Minolta
- AirPrint, Mopria, Konica Minolta cloud print connectors
- Brother
- AirPrint, NFC tap to print, WiFi Direct, Brother iPrint&Scan
Finishing
- Konica Minolta
- Stapler, hole punch, booklet, perfect bind on production models
- Brother
- Automatic duplex and multi tray paper handling; no booklet finishing
Footprint
- Konica Minolta
- Floor-standing A3 multifunction
- Brother
- Compact desktop footprint
Available via LeasemyPrinter
- Konica Minolta
- No
- Brother
- Yes, from $160 a month (plus GST) on a 36 to 60 month term
| Factor | Konica Minolta | Brother |
|---|---|---|
| Class of device | A3 colour MFP (bizhub range) | A4 mono and A4 colour MFP (MFC-L range) |
| Largest sheet size | A3 | A4 |
| Speed band | 25 to 65 ppm common configurations | 31 to 50 ppm across the MFC-L range |
| Device security | Self encrypting drive, secure print, IP filtering | Secure-print release and NFC card authentication on advanced models (e.g. MFC-L8900CDW) |
| Scan workflow | Scan-to-encrypted-folder, Workplace Hub | Scan to folder, email and the Brother iPrint&Scan app |
| Mobile / cloud print | AirPrint, Mopria, Konica Minolta cloud print connectors | AirPrint, NFC tap to print, WiFi Direct, Brother iPrint&Scan |
| Finishing | Stapler, hole punch, booklet, perfect bind on production models | Automatic duplex and multi tray paper handling; no booklet finishing |
| Footprint | Floor-standing A3 multifunction | Compact desktop footprint |
| Available via LeasemyPrinter | No | Yes, from $160 a month (plus GST) on a 36 to 60 month term |
How we compare: this table is based on published manufacturer specifications and publicly available product documentation, reviewed October 2026, not independent lab testing.
Brand and product names on this page are trade marks of their respective owners. LeasemyPrinter is an independent printer leasing business.
We are not an authorised dealer for, affiliated with, or endorsed by any brand we do not lease.
How Konica Minolta and Brother weigh up
Each side's device class, weighed on the same points, resolving to the brands we lease.
Where the two ranges meet
Konica Minolta and Brother on pages per minute
Both ranges cover 31 to 50 pages per minute, so speed on its own rarely decides this. Volume, sheet size and service cover usually do.
Ranges as published by each manufacturer for common configurations, the same figures shown in the comparison table above. Not independent testing.
Konica Minolta strengths
- A3 sheet size for plan sets, spreadsheets and oversized client documents.
- Perfect binding and booklet finishing on premium production models.
- Built for centralised production volumes rather than small office or branch printing.
Brother strengths
- Sits on a desk rather than the floor, which matters in a branch office with no room set aside for printing.
- Super high yield cartridges run longer between changes than standard yield ones on steady everyday A4 volumes.
- Card based secure print release on models such as the MFC-L8900CDW, without the cost of a production grade device.
When Konica Minolta is the starting point
- Workflows that genuinely need A3, such as plan sets, large format spreadsheets or oversized client documents.
- Print rooms producing bound or perfect bound documents in house.
- Existing Konica Minolta fleets being expanded for fleet management consistency.
When Brother is the starting point
- Offices with no A3 workflow at all, where production capability would sit unused most of the month.
- Branch sites with a desk to put a machine on rather than a room to put it in.
- Teams that want card based secure print release without paying for production finishing they will not use.
Still weighing the two brands for your office?
Answer 5 quick questions about your print volume, colour use and lease length.
The free quiz takes about 2 minutes and matches you to one Kyocera printer with an estimated monthly cost.
Other brands we lease are quoted on request. No obligation.
Sheet size decides this one
Konica Minolta is A3, Brother is A4: see the difference
Flip the same document between A4 and A3. If nothing you print needs the larger sheet, the extra production capability sits unused.
A3: dimensions, markups and RFIs stay legible
Full plan sets, marked up drawings and RFIs print at the scale the trades actually read on site, with no squinting, no misread dimensions, no reprints.
Preconfigured for this
A3 colour multifunction, 45 to 55 ppm, with an A3 bypass tray for plan sets and drawing revisions.
How to choose between Konica Minolta and Brother
- Work out the largest sheet size your workflow genuinely uses first, because that single answer usually settles bizhub against the MFC-L range on its own.
- Add up your monthly volume and your colour to mono split next, then size the device to that number rather than to a brand name.
- List your finishing requirements. bizhub offers stapling, hole punch, booklet and perfect bind on premium models; the Brother MFC-L range offers automatic duplex and multi tray paper handling but no booklet finishing.
- Measure the floor space you actually have free. bizhub needs a floor standing footprint, while the MFC-L range sits on a desk. LeasemyPrinter leases the Brother range, not Konica Minolta.
- Get a Brother MFC-L quote sized to your volume and term, then weigh the total monthly cost, with maintenance, parts and consumables built in, against your current arrangement.
Before you sign
Seven things to check on the quote, whichever of Konica Minolta and Brother you pick
Brand comparisons tend to stop at speed and price.
The complaints that show up a year later are usually about none of that.
The operating details below decide whether a device suits your office, and each one comes with the exact question to ask about the model you are quoted.
We have not bench tested these machines, so the figures below are the ones to request rather than ones we assert.
1. Warm up and first page out time
A device that sleeps deeply saves power and then makes everyone wait. In an office of short, frequent jobs this is felt more than the headline speed.
Ask: Ask for first page out time from sleep, not just pages per minute, on the exact model quoted.
2. Scan resolution and duplex scanning
If paper enters your document system through this machine, scan quality and whether it captures both sides in one pass matter more than print speed.
Ask: Ask for the optical scan resolution and whether the feeder is single pass duplex.
3. Recommended monthly volume, not maximum duty cycle
Maximum duty cycle is a survival figure. The recommended monthly volume is the one the device is built to run at without accelerating wear.
Ask: Ask for the recommended monthly volume and compare it to your actual monthly pages.
4. Toner yield and what a full set costs
Yield varies widely between models at similar prices. On an all inclusive agreement this is our cost rather than yours, but it tells you how the device was specified.
Ask: Ask for the rated yield per cartridge at 5 per cent coverage for the model quoted.
5. Driver and firmware support on your systems
The most common post install complaint in IT forums is not hardware. It is a driver that fights a particular operating system, print server or scan to folder setup.
Ask: Name your operating systems and whether you use a print server, before you sign, not after.
6. Finishing fitted at install
Stapling, hole punch and extra trays are fitted to the device. Adding them later is not a simple upgrade on a three to five year agreement.
Ask: Describe the documents you actually produce so the finisher is specified once, correctly.
7. Who attends, and how fast
Two identical machines differ entirely depending on whether a technician is local or dispatched from a capital city.
Ask: Ask where the nearest technician is based and what the onsite response commitment is in writing.
Ready to lease Brother? Get your quote
Before you enquire
How long am I locked in for?
Terms run 36 to 60 months and nothing shorter is offered.
You pick the length at the start, and a 60 month term carries the lowest monthly figure.
What are my options when the term ends?
You decide between upgrading to a newer model, continuing on the same device, or returning it.
Nothing renews on its own, and any new agreement is quoted in writing first.
Can the equipment be swapped later?
The agreement allows a move to a bigger printer or a different model.
A swap is re priced and confirmed in writing, then delivered usually within about 10 business days of a confirmed order, installation included.
Does leasing suit a small office?
Small offices lease on the same terms as large ones.
Past roughly 500 pages a month, the comparison usually starts to favour leasing once cartridges and unplanned service calls are counted in.
Cartridges and unplanned service calls stop arriving separately and become one monthly set plan.
Can we get a quote while partway through an existing agreement?
Yes.
Many businesses who contact us are partway through an existing agreement.
We prepare your quote now and time the new installation to your current lease end date, so there is no overlap and no print outage.
Check the notice window in your existing contract early, because those dates are easy to miss.
Call us or submit the form and we will map the changeover with you.
Frequently asked questions
Does LeasemyPrinter lease Konica Minolta?
LeasemyPrinter leases Kyocera, HP, Toshiba and Brother.
We do not currently lease Konica Minolta.
If your workflow genuinely needs A3, the closest match in our range is the Toshiba eStudio or Kyocera TASKalfa A3 colour family.
If your printing is A4, the Brother MFC-L range leases from $160 a month (plus GST) on a 36 to 60 month term.
Can a Brother MFC-L replace an A3 bizhub?
Only if A3 was never really part of the workflow.
The MFC-L range tops out at A4, so anything larger needs a different device.
Check what actually printed above A4 size last month.
If the answer is nothing, an A4 device covers the work.
If it happens regularly, stay in the A3 class.
What is included in a Brother lease and what do I still pay for?
The monthly fee covers the equipment, toner, parts, service labour and call outs, on the same terms whether you are coming off a bizhub fleet or another A3 device.
You only buy paper.
Leases start from $160 a month (plus GST) on a 36 to 60 month term.
Tell us your monthly volume and whether you need colour, and we will quote the matching MFC-L configuration.
What you get
Imagine one bill that never surprises you
Your Brother multifunction lease bundles the hardware and the running costs into a single set monthly payment, so the only thing you buy is paper.
No separate toner orders.
No surprise service bills.
Just one predictable line on the books.
Included in every lease: the device, scheduled maintenance, genuine Brother toner and consumables, and remote diagnostics for the contract term.
Not ready for a quote yet?
Book a time for us to call you, or read the buyer's guide first.
From Konica Minolta against Brother to one quote
You are weighing Konica Minolta against Brother. Tell us your volume and term, and we quote the Brother configuration that matches.
- Konica Minolta vs Brother
- We line them up
- One Brother quote
